Request a Callback
Please enter your name and phone number and we call you back soon.
Get a Free Quote
Give us a call at (647) 479-4069 or fill out the form below.
Polyforce Plus is used for concrete repair, patch work, industrial floor coating, and waterproofing.
Sealing and waterproofing of basements, foundations, facades, pools, tunnels, mines, wastewater treatment structures, large concrete pipes, steel joints and many more.
The material itself is clear, therefore can be mixed with a coloring powder or colored flakes for a sparkling decorative finish.
Non combatable, flexible two component Epoxy base resin, designed for rehabilitation and protection of reinforced concrete structures exposed to high moisture or running water at temperatures from +5°C +60°C.
Cured surfaces are rated to operate in ranges from -100°C to +100°C.
The life span of a treated surface is over 300 freeze thaw cycles.
Rehabilitation, protection or reinforcement of reinforced concrete main barring structures.
Vibration Dampening and structural reinforcement on bridges or rail structures.
Rehabilitates and protects metals from hydro erosion of metals, high pressure pumps, ship/machine body and others.
Two Component Polymer
Roll-on, brush or airless spray application
- Comprehensive strength of 85 MPa, Adhesive strength of 1.85 MPa.
- Our material is certified by the Ministry of Transportation and exceeds all requirements by more than 200%.
- Rated for 25 years of useful life.
Technical Data Sheet:
MTO Certified Testing Results:
PolyFlex is used for sealing concrete joints or can be used on mechanical joints as well.
While possessing very strong adhesive qualities, the material remains soft, which makes it ideal on any joint sealing application. The material does not react to water and is applied in a liquid form. For application on ceilings or tunnels an airless compressor is used to inject the material. Injection of the material displaces water and moisture while filling all cavities. This process insures long lasting waterproofing. The cured material is able to expand or contract up to 200% without loss of adhesion or tensile deterioration.
PolyFlex is ideal and cost saving application for parking garages, concrete slabs, large concrete surfaces with joints or vertical structures with multiple slabs.
Two Component Liquid Rubber
Brush or airless compressor application
- Cured material is able to expand or contract up to 200% without loss of adhesion or tensile deterioration. This is an ideal waterproofing joint filler solution.
Technical Data Sheet:
Restoration of concrete mechanical qualities, Waterproofing of floors, basement and retaining walls. The application is made on the negative side (inside), which brings substantial cost savings.
Is used for armouring of any exposed concrete surface. This molecular structure of the material permeates concrete as deep as 15 mm. 100% of the material cures and resides below the surface of the treated area. Armoured surface restores structural qualities with a gain of total 50 MPa of elastic compressive strength.
Polyforce Hardener protects the surface for moisture, weather elements, salts and light acids. The treatment greatly extends useful life the concrete.
Due to the fact that 100% of the material cures under the surface of the concrete, treated area does not change friction qualities.
This material is often used on an adhesive anchor when applying concrete patches.
One Component Liquid Polymer
Roll-on, brush or airless compressor application
- Is ideal as an anchoring bonding agent, the adhesive layer when merging old and new concrete.
- Treated concrete gains total of 50 MPa of compressive strength.